Topics with Label: Tools and Materials

 Ozito 1800W 2030PSI High Pressure Washer - Bunnings Australia This is a stupid question but we just need to ask..we have read the manual but s ...

Hi, I'm going to paint my iron fence which has concrete posts and timber rails. So 3 different types of materials. Could someone please recommend a p ...

  Hello! I am obsessed with these blocks, but unsure how to build a wall with them? previous blocks I have seen have a channel for rebar, but the bun ...

Hi everyone, I'm planning to install a deck in my backyard and have drawn up a plan. The dimensions of the deck are 518 cm by 732 cm, and I plan to pu ...

Hi Team, I want to install Outdoor PVC blinds to my outdoor patio. I want to know if I should go with 1 3000x2400 and 1 2000x2400 and joing them with ...

My fence and retaining wall were damaged by my neighbour's builder during the constructions works. The retaining wall, posts and fence were deflecte ...

  The project was to redesign a modern backyard maximising the open space and creating a space for entertaining.  StepsStep 1Fence replacement ...

Hi all Which product at bunnings can be used to open this security screw?  

Hi, I recently lifted some old ceramic tiles from my front landing using the Ozito Rotary Hammer Drill with the chisel attachment, which worked a trea ...

Hey guys This shouldnt be too hard to do but just wanted to check incase I am missing anything I want to put some compacted gravel or some sort of roc ...

I did a bit of a rookie error and tried to clean up some stains with hydophloric acid mixed with some water on my driveway concrete Poured it on and ...

Hi there! I have a beautiful outdoor table that has cracked, even though it’s been under a pergola and cover. The product description states it’s mad ...

Hi workshop community, We’re planning on creating a stepping stone path along this side of our house. We are using tobishi stepping stones with Ca ...

Hi, i want to repaint the courtyard as you can see the paint had come off. Already did pressure wash. What to do next? This is my first time no han ...

Hi everyone, I recently decided to build a storage area under my deck. I decided to use 600m x 600mm concrete pavers for the floor. I should have re ...

Hi there! I've got a few questions about stormwater pipes (agi and PVC) and the correct connections for them. I've had a look around the forums but ...

Hi There,I'm looking for the best way to make my front entrance path more disability-friendly for my parents. They have trouble with steps. any advice ...

After further research and helpful input from you guys i am now planning to build an approximately 3m x 3m deck (no pergola) over a slightly sloping c ...