Tools and Materials

A very simply fix but proved to be effective. This had been on my mind for a very long time and I looked into chemical treatment and even replacing th ...

I wanted to retro fit insulation batts under our house, which is leveled up on tilts. I have read all posts here on this subject and chosen earthwool ...

  Hi brain trust, I'm renting out two of my rooms, and both of these roommates have pets, which are common in my suburb. I'm worried that even th ...

  How do you go about straightening an old timber framed wall, ready for plaster? I don’t think it’s out that much, but how can you tell it’s strai ...

      Hey guys, I am planning to build some backdoor steps, the platform is 800mm in height and i plan to use 2x Peak Black 4 Tread Steel Stair St ...

     I wonder do I still have to apply one more layer onto the putty or I can simply sand it and paint on it.

After further research and helpful input from you guys i am now planning to build an approximately 3m x 3m deck (no pergola) over a slightly sloping c ...

What do I use to replace slats on an antique bed 1770 l x 1340 w      

Tell me you watch restoration shows without telling me you watch restoration shows. This mid century modern light shade was on my front patio which ...

  I am installing new Hevea benchtops over existing base cabinets. The installation instructions state the joiners should be used. However, will th ...

How can i repair these grout of porch tiles- its all falling off -  is there anything easy diy? its side gap connecting brick wall and steps What mate ...

I painted a door with Taubman's AllWeather exterior grade paint, 3 coats matt, as it is for a back gate. The door is hardwood with a veneer. Since we ...

Outdoor Roller Blind Permanently fix outdoor roller blind to either the deck or the ground. Does anyone have any suggestions about what I can do to ...