Hey gents, just wanted to say thanks for the help a share a photo of the end result. I ended up joining the timber using a combination of biscuit joi ...
Many thanks everyone! There some great ideas there. I think what I might do is start with some biscuits and glue (I have a gorilla ultimate wood glue) ...
Many thanks Eric! I did consider the bench top joiner but wasn’t sure if it was much better than biscuits. The flange is an interesting option. I’d ha ...
Thanks @Brad ! I found those online but struggling to find a local supplier. @tom_builds i had the same idea. I'm thinking i might do it that way. The ...
Thanks so much @Adam_W @Jason @EricL @tom_builds! I really appreciate each of your advice, thank you. @Adam_W Thanks for the explanation about force ...
Hello! I'm building a round, free standing, low profile deck and was hoping to please have someone with a bit more experience double check the specs, ...
Evening @midas I was going for a simpler solution to the problem tho @EricL has said the same with the metal flange. I do like the way @JoeAzza has a ...
Hi @midas , just to add to my post, re clamping the timber panels so they stay level/aligned with each , here is an idea I found on line, if you want ...
Hi @midas, I would also use biscuit joints or floating mortises, I join timber using the Festool Dominoes similar to biscuit joining, just use a good ...
Mitek 45 Degree Joist Hanger They are wrap around style, not sure on sizing for your project but they have a diagram and phone numbers listed for mos ...
While joist hangers don't seem to come in an angled variety @midas, you might find that you can bend them sufficiently to achieve what you need, and t ...
Looks like an exciting project @midas, can't wait to see the finished project. I think @EricL and @Adam_W have pretty much covered everything, the onl ...
Hey gents, just wanted to say thanks for the help a share a photo of the end result. I ended up joining the timber using a combination of biscuit joi ...
Many thanks everyone! There some great ideas there. I think what I might do is start with some biscuits and glue (I have a gorilla ultimate wood glue) ...
Many thanks Eric! I did consider the bench top joiner but wasn’t sure if it was much better than biscuits. The flange is an interesting option. I’d ha ...
Thanks @Brad ! I found those online but struggling to find a local supplier. @tom_builds i had the same idea. I'm thinking i might do it that way. The ...
Thanks so much @Adam_W @Jason @EricL @tom_builds! I really appreciate each of your advice, thank you. @Adam_W Thanks for the explanation about force ...
Hello! I'm building a round, free standing, low profile deck and was hoping to please have someone with a bit more experience double check the specs, ...
