Workshop
Ask a question

Topics with Label: Flooring

shirley1231
Finding My Feet
7 replies

  When I seal slate with gloss sealer and a brush I leave brushmarks. What is the best way to apply gloss sealer to eliminate brush marks.  

Lee777
Getting Established
20 replies

Guys, Im looking at installing 13mm solid jarrah floor boards on existing concrete slab. Do you have any videos/publications on:- Preparation A ...

ejo
Finding My Feet
1 reply

  Noticing ants getting in and out of a few gaps between the wall and the floor in my living room. I don’t have skirting boards btw. I’ve removed al ...

rochester
Growing in Experience
8 replies

Hey all, My house has cypress pine floorboards that have seen better days - Pic attached. The floor itself looks in pretty decent shape, few little ...

GurpreetSingh
Finding My Feet
6 replies

i am building double story house and have yellow tongue subfloor exposed to weather more than 6 months.Due to wet and dry again and again yellow tongu ...

mush23
Just Starting Out
1 reply

Hi all, Accidentally burnt a small area of the carpet the carpet while drying it and now professionals are asking for 200 plus dollars and I can't r ...

Fatsquare
Growing in Experience
10 replies

I have about 4.3m*3.7m living area concrete base need to level up about 9mm height in order to lay laminated floor. Any idea to do it, plywood floorin ...

JenB43
Just Starting Out
1 reply

The house painter we engaged 6 years ago painted the 140 year old stair ballustrades with white oil based paint. They left splatters on the unpainted ...

shirley123
Just Starting Out
1 reply

I have lived in my home for 30 yrs and have a black slate floor throughout most of the house. I have sealed it several times with gloss sealer. I have ...

pooch1
Finding My Feet
6 replies

Hi there, im in the process of renovating a house for my son, first question I have is should I paint ceiling and walls before sanding floor or do th ...

H-M
Finding My Feet
4 replies

Hi Team I have removed and internal wall in my 1967 home only to find the Ash floor boards don't flow all the way through. I am looking to cut them b ...

victoriacalhoun
Finding My Feet
9 replies

Spray Tan Salon renovations / advice on skirting boards. Hi everyone. I am in the process of renovating what used to be my garage, however, it is now ...

HJS
Finding My Feet
5 replies

We have metal transition strips between tile and floating wooden floors. I hate them - to make matters worse, the builder (years ago) used different s ...

raerific
Finding My Feet
7 replies

just moved into this rental and the grout is horrendous. Seems like someone painted the grout lines white and paint has chipped overtime. What is the ...

Chrismichael
Finding My Feet
2 replies

Hello, I want to place black plastic polythene under my subfloor. The plastic needs to go on top of the ground to keep the moisture from effecting har ...

Samara1
Getting Established
9 replies

how about using the same white based tiles for both Indoor living & Outdoor Alfresco for seamless look. I have corner stacker door which connects both ...

lily4
Just Starting Out
1 reply

The previous owners of the house had installed a wardrobe in this room and had made holes in the tile floor to place wooden supporting beams. I’ve tak ...

metamorphosis56
Finding My Feet
3 replies

Hi everyone, I’m new here and this is my first post! We will be laying 7mm hybrid flooring throughout the house. 2/3 of it will be over tiles, the oth ...

kitkattimtam
Just Starting Out
1 reply

Hi Bunnings, I am preparing my old concrete slab for tiling. Just wonder if I could patch low spots (3-5mm) with self levelling compound or should I ...

Lemming
Getting Established
3 replies

I recently bought a house and (what I'm assuming is) the polyurethane layer on the floor in the study is peeling. The study is quite small ~8m^2 and ...

amsclarke
Finding My Feet
4 replies

Hello I am trying to undertake a hybrid flooring project throughout the house. I am not sure what product I can use to raise the floor height by 15mm ...

atmatic
Getting Established
1 reply

Hi all, as a separate question again from my other posts. I have (finally) finished lifting up all of the old ceramic tiles (Hallway, Kitchen, Dinin ...

palmhead2011
Just Starting Out
1 reply

Can anyone advise the best method and filler to repair small holes in indoor slate tiles. I have attached a photo of the worst case.

Benk
Growing in Experience
3 replies

I have a transition - for lack of a better word that i need to resolve. I am not sure what to make of this but we will start from where we are. The 2 ...